Precautions When Using the Industrial Grease

Here are some things to note when using grease:

Choose the right grease

 Choose the right type and brand of grease according to the working conditions of the equipment (such as temperature, load, speed, environment, etc.), the requirements of the lubricated parts, and the performance characteristics of the grease.

Clean the lubricated parts

Before applying grease, the lubricated parts should be thoroughly cleaned to remove dirt, dust, metal chips and old grease residues to ensure that the new grease can fully function.

Prevent impurities from mixing

In the process of taking and filling grease, impurities, moisture and dust should be avoided to avoid affecting the performance of the grease and causing equipment wear.

Apply the right amount:

Do not use too much grease. Excessive grease may increase friction resistance, cause poor heat dissipation, and even squeeze out the lubricated parts, causing waste and pollution. But it should not be too little, otherwise it will not provide sufficient lubrication protection.

Avoid mixing different types:

Greases of different types, brands and manufacturers may have different compositions and properties, and generally should not be mixed at will unless there is a clear compatibility description.

Regular inspection and replenishment:

According to the maintenance requirements of the equipment, regularly check the status and remaining amount of grease, and replenish or replace it in time.

Storage conditions:

Grease should be stored in a dry, cool, well-ventilated place, avoid direct sunlight and high temperature environment to prevent grease deterioration.

Follow the instructions for use:

Strictly follow the product instructions of the grease and the maintenance manual of the equipment.

Pay attention to the shelf life:

Use grease within the shelf life. Expired grease may have reduced performance and cannot meet the lubrication needs of the equipment.

In short, the correct selection and use of grease, and following the relevant precautions, are of great significance to ensure the normal operation of the equipment and extend its service life.