Lubricating oil safety data sheet

Part 1: Chemical Name Chemical Name: Lubricating Oil Chemical Molecular Formula: Molecular Weight: 230-500

Part 2: Ingredient/composition information Hazardous ingredient content cas no.

Part 3: Hazard Overview Hazard Category: Route of Invasion: Health Hazards: Acute inhalation may cause fatigue, dizziness, headache, nausea, and severe cases may cause grease pneumonia. For slow exposure, oily acne and exposure may occur at exposed parts Dermatitis. It can cause neurasthenic syndrome, respiratory tract and eye irritation symptoms and chronic grease pneumonia. There are reports of carcinogenic cases among workers who are exposed to petroleum lubricants: Environmental hazards: Explosion hazard: This product is flammable and toxic. Irritating.

Part 4: First aid measures. Skin contact: Take off contaminated clothing and rinse with plenty of running water. Seek medical attention. Eye contact: Lift eyelids and rinse with running water or saline. Seek medical attention. Inhalation: Leave the scene quickly to fresh air and maintain respiratory tract. If breathing is difficult, give oxygen. If breathing stops, perform artificial respiration immediately. Seek medical attention. Ingestion: Drink enough warm water and induce vomiting. Seek medical attention.

Part 5: Fire-fighting measures Hazardous characteristics: In case of open fire, high heat is combustible, harmful combustion products: carbon monoxide, carbon oxide. Fire-fighting methods: Firefighters must wear gas masks and full-body fire-fighting suits, and put out fires in the upwind direction. Move containers away from the fire scene as much as possible Move to an open area. Spray water to keep the fire scene container cool until the fire is extinguished. If the container in the fire scene changes color or makes a sound from the safety pressure relief device, it must be evacuated immediately. Fire extinguishing media: mist water, foam, dry powder, Carbon dioxide, sand.

Part Six: Emergency Response to Leakage Emergency Response: Quickly evacuate personnel in the leaked contaminated area to a safe area, isolate them, strictly restrict access, and cut off the source of fire. It is recommended that emergency responders wear self-contained positive-pressure respirators and protective clothing as much as possible. Cut off the source of leakage. Prevent it from flowing into sewers, flood ditches and other restricted spaces. Small leakage: use sand or other non-combustible materials to absorb or absorb. Large leakage: build a dike or dig a pit to contain it, and use a pump to transfer it to a tanker or special purpose In the collector, recycle or transport to waste treatment site for disposal.

Part 7: Operation, handling and storage Operation precautions: Close operation and pay attention to ventilation. Operators must undergo special training and strictly abide by operating procedures. It is recommended that operators wear self-priming filter gas masks (half masks) and chemical safety glasses Wear anti-toxic work clothes and rubber and oil-resistant gloves. Stay away from fire and heat sources. Smoking is strictly prohibited in the workplace. Use explosion-proof ventilation systems and equipment. Prevent steam from leaking into the workplace air. Avoid contact with oxidants. Load and unload with care when handling. , to prevent damage to packaging and containers. Equip with corresponding varieties and quantities of fire-fighting equipment and leakage emergency treatment equipment. Empty containers may retain harmful substances. Storage precautions: Store in a cool, ventilated warehouse. Keep away from fire and heat sources, and should be kept away from fire and heat sources. Oxidants should be stored separately and mixed storage should be avoided. Corresponding types and quantities of fire-fighting equipment should be provided. The storage area should be equipped with leakage emergency treatment equipment and suitable containment materials.