Transportation and storage of lubricants
author: Ann
2024-09-06
(Ⅰ) Bulk oils
1. The containers in which lubricating oils are held and stored must be clean.
2. Transportation and storage of transformer oil and turbine oil requires "special tanks and lines"; other oils should be set up according to the internal combustion engine oil, hydraulic oil, gear oil, three major categories of products storage and transportation facilities.
3. pay special attention to the transportation and storage process to prevent the mixing of water and impurities.
4. the storage period of bulk lubricating oil should not exceed half a year.
5. the density of lubricating oil is about 0.75~0.95g/cm which is lighter than water and insoluble in water, the flash point of lubricating oil is generally higher than 150℃, it is a combustible item, so attention should be paid to preventing the outflow from polluting the environment and catching on fire during the process of storage and transportation.
6. labeled with the name, grade, level, quantity and date of entry into the warehouse.
7. the same oil produced by different manufacturers can not be mixed storage in principle, such as must be mixed storage can not be done first "mixed test" to confirm that there is no adverse reaction before you can operate.
(er) Oil in barrels
1. The loading and unloading of oil products is strictly prohibited, the height of oil products should be appropriate, and the number of layers should not be too many, so as to avoid the danger of collapse or crushing of products.
2. special attention should be paid to prevent water and impurities from mixing during transportation and storage.
3. the storage period of lubricating oil in barrels can be longer than that in bulk, but generally not more than one year.
4. different oils should be stacked separately and marked clearly with name, brand, grade, quantity and storage, etc., so as not to make a mistake when shipping.
1. The containers in which lubricating oils are held and stored must be clean.
2. Transportation and storage of transformer oil and turbine oil requires "special tanks and lines"; other oils should be set up according to the internal combustion engine oil, hydraulic oil, gear oil, three major categories of products storage and transportation facilities.
3. pay special attention to the transportation and storage process to prevent the mixing of water and impurities.
4. the storage period of bulk lubricating oil should not exceed half a year.
5. the density of lubricating oil is about 0.75~0.95g/cm which is lighter than water and insoluble in water, the flash point of lubricating oil is generally higher than 150℃, it is a combustible item, so attention should be paid to preventing the outflow from polluting the environment and catching on fire during the process of storage and transportation.
6. labeled with the name, grade, level, quantity and date of entry into the warehouse.
7. the same oil produced by different manufacturers can not be mixed storage in principle, such as must be mixed storage can not be done first "mixed test" to confirm that there is no adverse reaction before you can operate.
(er) Oil in barrels
1. The loading and unloading of oil products is strictly prohibited, the height of oil products should be appropriate, and the number of layers should not be too many, so as to avoid the danger of collapse or crushing of products.
2. special attention should be paid to prevent water and impurities from mixing during transportation and storage.
3. the storage period of lubricating oil in barrels can be longer than that in bulk, but generally not more than one year.
4. different oils should be stacked separately and marked clearly with name, brand, grade, quantity and storage, etc., so as not to make a mistake when shipping.
Equipment rust prevention methods and lubricating oil rust prevention
What factors affect the performance of grease?
