How to judge whether the equipment should be greased?

You can judge whether the equipment should be greased from the following aspects:

Equipment operation time

If the equipment has been running for a certain period of time according to the prescribed maintenance cycle, it may be necessary to add grease. You can refer to the recommended time in the equipment manual.

Equipment noise

When the noise increases significantly during the operation of the equipment, it may be due to insufficient lubrication and increased friction. At this time, you can consider adding grease.

Temperature change

The temperature of some parts of the equipment rises abnormally during operation, which may be caused by poor lubrication. You need to check whether grease should be added.

Equipment vibration

If the equipment vibrates abnormally, it may be due to insufficient lubrication, which affects the normal operation of the parts. You should consider adding grease.

Observe the lubrication part

You can check the grease status of the lubrication part through the observation hole on the equipment or open the protective device. If the grease is significantly reduced, dried, discolored, or impurities appear, you need to add new grease.