Issues you must pay attention to when buying lubricants
author: Leila
2024-09-23
The purchase of lubricants is an important part that cannot be underestimated. In the process of purchasing lubricants, in addition to choosing the right lubricants, what other issues do you need to pay special attention to? In order to prevent inferior oil from being mixed into the transportation process, prevent improper operation during transportation, unloading, and subpackaging, and cause pollution to the oil products, and prevent accidents from burying hidden dangers for your equipment, the editor lists 60 issues for you in installments. Buyers need to learn about these issues from oil suppliers. The previous issue focused on the repackaging of oil products. This issue focuses on the issues that need to be paid attention to after the lubricants are delivered to the destination.
You need to ask your oil supplier about these issues to prevent them before they happen:
1. Is there a standard operating procedure (SOP) for the unloading process?
2. Does the driver have corresponding delivery documents for each delivery to report all the situations in the delivery process?
3. If it involves the transportation of different oil products, is there a corresponding pipeline flushing process?
4. If there are multiple lubricants, is there a corresponding oil pump flushing process each time another oil is pumped?
5. Is there a specified value for the amount of flushing oil used during the flushing process? If the flushing process is not carried out in accordance with this regulation, the residual oil will not be cleaned up and will be incompatible with the subsequent oil products after mixing. Regarding this point, is there a corresponding description of the flushing process?
6. Is the prescribed amount of flushing oil a quantitative value or a result based on qualitative analysis?
7. Is the amount of flushing oil an accurate measured value or an estimated value?
8. Is the amount of flushing oil regularly checked and verified for reliability in actual use?
9. Are oil containers placed in a dry and clean environment?
10 Are reusable oil containers (barrels, truck tanks) only used to hold a specific type of oil? If it involves holding another type of oil, is it thoroughly flushed?
11. Are the pipes and spray guns used for repackaging and repackaging oil products kept in a clean, dry place and sealed?
What grease is suitable for high temperature conditions
Abbreviations for various types of synthetic oils
